Glove Box Door

REMOVAL PROCEDURE

Door Removal Procedure:

1. Use a punch and a hammer drive out door hinge roll pins.

Door Removal Procedure:

2. Remove the I/P compartment door from instrument panel compartment box.

IMPORTANT: The removal of the compartment door from the guide stops (1) requires care not to break the guide stops as the guide stop on the left side (where damper mounts) is a tight fit when removing.

INSTALLATION PROCEDURE

Door Cover: Installation Procedure:

1. Install the I/P compartment door to I/P compartment box.

Door: Installation Procedure:

2. Using a punch and a hammer drive in door hinge roll pins.