Reveal Molding Retainer Replacement (Rear)

Reveal Molding Retainer Replacement (Rear): Removal Procedure:

REMOVAL PROCEDURE
1. Remove rear window reveal molding. Refer to Rear Window Reveal Molding Replacement
2. Use a plastic tool to assist in pushing away from the rear window while working the reveal molding retainers (2) out of the pinchweld to remove the reveal molding retainers (2) from the upper section and from the lower section of the rear window.

INSTALLATION PROCEDURE

Reveal Molding Retainer Replacement (Rear): Installation Procedure:

1. Install the reveal molding retainers (2) to the upper section of the rear window.
2. Install the reveal molding retainers to the lower section of the rear window.

IMPORTANT: If rear window reveal molding retainers can not be properly installed due to the rear window fit or urethane interference remove the rear window.

3. Install rear window reveal moldings.