Pressure Cycling Switch

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Disconnect the A/C control switch connection.
3. Remove the A/C control switch.

INSTALLATION PROCEDURE
IMPORTANT: Counterhold the compressor/condenser hose using a wrench.
1. Install the A/C control switch:
^ Use new O-rings.
^ Lubricate the new O-rings using mineral oil, 525 viscosity. Tighten the A/C control switch to 7 Nm (62 lb. in).
2. Connect the A/C control switch connector.
3. Lower the vehicle.