A/C High Pressure Cut-Out Switch

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Disconnect the A/C compressor refrigerant pressure switch connection.
3. Remove the A/C compressor refrigerant pressure switch.

INSTALLATION PROCEDURE
IMPORTANT: Counterhold the compressor/condenser hose using a wrench.

1. Install the A/C compressor refrigerant pressure switch:
^ Use new O-rings.
^ Lubricate the new O-rings using mineral oil, 525 viscosity. Tighten the sensor to 7 Nm (62 lb in).
2. Connect the A/C compressor refrigerant pressure switch connector.
3. Lower the vehicle.