Inlet

REMOVE OR DISCONNECT
1. Partially drain the cooling system.
2. Remove the intake air plenum. See Powertrain Management.
3. Remove the inlet hose (3) from the engine coolant bridge.
4. Remove the inlet hose from the throttle body.
5. Remove the inlet hose while noting the routing.

INSTALL OR CONNECT
1. Install the inlet hose, routing as noted during removal.
2. Install the inlet hose to the throttle body.
3. Install the inlet hose (3) to the engine coolant bridge.
4. Install the intake air plenum. See Powertrain Management.
5. Fill the cooling system.