Replacement

TOOL REQUIRED
- J 28467-A Engine Support Fixture
- J 28467-450 Engine Support Fixture Adapter
- J 36857 Lift Brackets





REMOVE OR DISCONNECT
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Drain the engine oil.
4. Remove the oil pan.
5. Remove the oil pan housing.
6. Remove the oil pan baffle bolts.
7. Remove the oil pan baffle.
8. Clean the following components:
- Oil pan.
- Oil pan housing.
- Gasket surfaces.

INSTALL OR CONNECT
1. Install the oil pan baffle.
2. Install the oil pan baffle bolts. Tighten the oil pan baffle bolts to 8 Nm (71 inch lbs.).
3. Install the oil pan housing.
4. Install the oil pan.
5. Lower the vehicle.
6. Refill the engine oil.
7. Reconnect the negative battery cable.
8. Reprogram the applicable accessories.