Calibrating the Electrochromic Mirror Compass Manually

1. If the "C" is being displayed, drive the vehicle slowly (5 mph or less) in a 360 degree circle until the display reads a compass direction.
2. If the "C" is not being displayed turn the ignition switch "ON" and the Electrochromic Mirror "ON." Press the calibration switch by inserting the end of a paper clip into the hole on the bottom of the mirror and hold for 10 seconds until the letter "C" appears in the display. Now drive the vehicle slowly (5 mph or less) in a 360 degree circle until the display reads a compass direction.