PZ1552

Wiring Diagram:

CIRCUIT DESCRIPTION

DTC PZ 1552 indicates that the keep alive - or "long term" - memory in the PZM has been reset. It is a normal occurrence whenever power or ground is removed from the PZM, such as anytime the battery has been disconnected and reconnected.

ACTION TAKEN (BY PZM)

PZM memory is reset to initial values: The PZM will initialize the KAM contents to default:

Fuel Level Empty

Afterblow Mode Disable

Afterblow Alarm Disable

Controlled Power Timer Set to full time

Low Power State Set to "unknown"

Power Down Hours Clear

Shutdown No Controlled Power Shutdown

Storage Mode State Disable

Key Cylinder State Inactive

Class 2 Bus State Unknown

Driver Door Jamb Closed

Other Doors Jamb Closed

Ignition State Current State

TROUBLESHOOTING HINTS

If DTC PZ 1552 sets without a battery disconnect, ensure good terminal contacts at Connector C1 terminals "A12" and "B3".