Disabling Automatic Suspension

For Speed Sensitive Suspension (SSS) Only

If the decission is made not to repair the Automatic Suspension System, either due to parts availability or costs, the factory approved way to disable the Suspension Warning Light is as follows:

Page 8A-43-14:

1. Locate and cut circuit 370 (RED).

2. Attach the IPC side of circuit 370 to pin 87A of the relay.

3. Attach the module side of circuit 370 to pin 86 of the relay.

4. Run a ground wire to relay pin 30.

5. Run a wire from a switched ignition (hot in Run) source to relay pin 85.

The following parts are required to make the correction and are available through your local GM Dealer.

12193601 - Relay
15306045 - Connector