Component Tests and General Diagnostics

PROCEDURE
1. Check I/P Fuse Block Fuse #45. If open, check for a short to ground in CKT 1540.
2. Check I/P Fuse Block Fuse #35. If open, check for a short to ground in CKT 2040.
3. Check for a poor connection at G200.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check. These circuits maybe intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.