P096

Code PO96:

Transaxle Range Switch:

DESCRIPTION:
This diagnostic test checks for unusually large throttle position at low vehicle speed with the brake being applied. The primary purpose of this code is to record snapshot data and alert the driver that this driving condition could damage the vehicle drivetrain or create an unsafe condition. If such a driving condition exists, Code PO96 will set.

TEST CONDITIONS:
Codes P021, PO22 and P024 not set.

FAILURE CONDITIONS:
1. Brake applied.

2. Transaxle in DRIVE or REVERSE.

3. Vehicle speed 5 mph or less.

4. Throttle position 65 degrees or greater for 12 seconds.

ACTION TAKEN:
1. PCM turns 'ON' the 'SERVICE ENGINE SOON' MIL.

2. The SES MIL will remain 'ON' for 15 seconds after Code PO96 becomes history.