Service Procedure, Label and Warranty Claim

SERVICE PROCEDURE

1. Raise vehicle on hoist (vehicle must be level).

2. Strike fuel tank vigorously with a rubber mallet four (4) times on the bottom in the center.

Impacting the fuel tank in this manner will, in most cases, realign a mispositioned fuel sending unit within the tank. Note that the plastic fuel tank is very durable and capable of withstanding substantial impacts as described above.

3. Lower vehicle and install IPC Prom (P/N 16192433) as described in Section 8C, page 7, of the 1993 Seville/Eldorado Service Information Manual.

4. Fill fuel tank to fill capacity (20 gallons).

5. Install Campaign Completion Label.


CAMPAIGN COMPLETION LABEL

Upon completion of this campaign, a Campaign Completion Label (CAT. NO. S-1015) should be affixed on a clean, dry surface of the radiator core support in an area clearly visible when the hood is raised. Each label provides space to print in ink (or type) campaign number 93-C-5 and your five-digit Cadillac dealer code. Dealers are to take the steps necessary to ensure that these numbers are recorded and the label is properly affixed.








CREDIT

Credit for this campaign will be issued upon receipt of a properly prepared warranty claim which includes the information: