Fuel Meter Body

1. Remove fuel meter cover as previously described.
2. Remove fuel meter cover gasket, fuel meter outlet gasket and pressure regulator seal.
3. Remove fuel injectors as described under ``Fuel Injectors, Replace.''
4. Remove fuel inlet and outlet nuts and gaskets from fuel meter body.
5. Remove fuel meter body attaching screws, then separate body from throttle body unit. Remove and discard body gasket. Do not remove center screw and staking at either end securing fuel distribution skirt in throttle body unit.
6. Reverse procedure to install, noting the following:
a. Apply suitable locking compound to attaching screws.
b. Install new gaskets on fuel inlet and outlet fittings and torque inlet nut to 30 ft. lbs. and outlet nut to 21 ft. lbs.