Trunk - Corrected Wiring For Trunk Lid Pull-Down Unit
88cadillac12Bulletin No. T-89-23
File in Group 8
Number 87
Corp. Ref. No. 818114
Date Oct. 1988
SUBJECT: SERVICE INFORMATION MANUAL REVISION - TRUNK LID PULL-DOWN UNIT
MODELS AFFECTED: 1988 ALLANTE
The service information relating to the power circuit for the Trunk Lid Pull-Down Unit in the 1987-1988 Cadillac Allante Service Information Manual is incorrect. It is recommended that all Service Information Manuals be updated with the corrected information shown below.
Page 8A-11-0.1:
Circuit 350 (1 RED/WHT) from S214 to Trunk Lid Pull-Down Unit should be removed.
Page 8A-11-5:
Circuit 60 (3 YEL/BLK) should be added to S237 attaching directly to the Trunk Lid Pull-Down Unit power input.
Page 8A-135-0:
"Fuse 3 (3 AMP)" should be changed to "Circuit Breaker 22 (30 AMP)". Circuit 350 (RED/WHT) should be changed to Circuit 60 (3 YEL/BLK). S214 should be changed to S237. C404 should be removed.
Page 8A-135-1:
The component location chart should be modified to remove S214 and insert: "S237 Main Harness, Center Console, Beneath Fuse Block".