B552

Code B552 does not indicate a fault but is a normal occurrence anytime the power to the BCM has been interrupted. Code B552 cannot be cleared from memory in the normal manner. Code B552 can only be cleared if it is not current. Under normal conditions, the code will become history by the following:
^ Key in "LOCK"
^ Wait 5 seconds
^ Key "ON" - Re-enter Diagnostics

This code should now be history, and can be cleared in the normal manner.
The code will also set if the following conditions are met:
^ Ignition "CRANK"
^ No system voltage signal to BCM terminal 1C11.

The purpose of the crank circuit is to signal the BCM to shut off when cranking so that voltage variations that are normal during starting do not affect the electronic devices.

Code B552 Indicates that the KEEP ALIVE - or "LONG TERM" - MEMORY in the BCM has been reset. This will be the case whenever power is removed froM the BCM (such as, disconnecting the battery cables or disconnecting BCM Power Connector). This Code should be cleared from memory after restoring the BCM Power Supply.
^ Vehicle must be at normal operating temperature.
^ Charging and Starter System must in good operating condition.