Tail Lamp Assembly - Removal and Replacement Revised

Bulletin No. T 86-27
File in Group 10
Number 77
Corp. Ref. No. 806 9005
Date Jan. '86
SUBJECT: TAIL LAMP ASSEMBLY REMOVAL AND REPLACEMENT

MODELS AFFECTED: 1986 CIMARRON

TAIL LAMP ASSEMBLY:

This bulletin revises the information described in the 1986 Body Service Manual (pages 7E-11 and 7E-12) for removing and replacing the tail lamp assembly on 1986 Cimarrons.

The following procedure should be used when removing and replacing the tail lamp assembly.

Removal

1. Remove two screws securing license plate to license plate pocket.

2. Remove lamp assembly to pocket attaching screws, (Figure 1, Item 2).

3. Remove upper outer license pocket attaching nut (Figure 1, Item 4).

4. Open rear compartment lid and remove rear compartment end panel trim.

5. Remove four tail lamp assembly attaching nuts, (Figure 1, Item 3).

6. Remove tail lamp assembly, (Figure 1, Item 1)
Installation

Reverse removal procedure.

For warranty purposes, use operation number N-1590 to replace Right Tail Lamp Assembly, N-1591 to replace Left Tail Lamp Assembly at 0.3 hours.