Seals and Gaskets: Service and Repair

Front Wheel Drive Shaft Seal Replacement - Right Side

Special Tools

DT-50768 - Seal Installer

For equivalent regional tools, refer to Special Tools Tools and Equipment.

Removal Procedure

1. Drain the transfer case fluid. Refer to Transfer Case Fluid Replacement Transfer Case Fluid Replacement.

2. Remove the intermediate drive shaft. Refer to Intermediate Shaft Replacement Intermediate Shaft Replacement.




3. Install a sheet metal screw (2) into outer surface of the dirt deflector and grease seal assembly and remove with suitable pliers.

4. Discard the dirt deflector and grease seal assembly (1).

Installation Procedure




1. Install the NEW shaft dirt deflector and grease seal assembly (1) using the DT-50768 - installer.

2. Install the intermediate drive shaft. Refer to Intermediate Shaft Replacement Intermediate Shaft Replacement.

3. Fill the transfer case fluid. Refer to Transfer Case Fluid Replacement Transfer Case Fluid Replacement.