Engine Front Mount Replacement

Engine Front Mount Replacement

Removal Procedure

1. Raise and support the vehicle. refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the engine splash shield. Refer to Engine Splash Shield Replacement (Service and Repair).




4. Remove the motor mount to motor mount bracket nuts.




5. Remove the motor mount to frame nuts.
6. Using a suitable jackstand, raise the engine.
7. Remove the motor mount from the vehicle.

Installation Procedure




1. Position the motor mount on the frame
2. Use the jackstand to lower the motor mount bracket on to the motor mount.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the motor mount to frame bolts.

Tighten the nuts to 47 Nm (35 lb ft).




4. Install the motor mount to motor mount bracket nuts.

Tighten the nuts to 47 Nm (35 lb ft).

5. Install the engine splash shield. Refer to Engine Splash Shield Replacement (Service and Repair).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
7. Lower the vehicle.