Sunroof Sunshade Stop Replacement

Sunroof Sunshade Stop Replacement

Removal Procedure




1. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (Service and Repair).
2. Remove the sunshade stop screw from the sunshade track.
3. To remove the sunshade stop, press the sunshade stop locking tab in and slide sunshade stop out of the sunshade track.

Installation Procedure




1. Position the sunshade stop to the sunshade track.
2. Press the sunshade stop into the sunshade track until fully seated.

Notice: Refer to Fastener Notice.

3. Install the sunshade stop screw to the sunshade track.

Tighten the sunshade stop screw to 2 N.m (18 lb in).

4. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).