Front Wheel Drive Shaft Oil Seal Replacement - Left

Front Wheel Drive Shaft Oil Seal Replacement - Left Side

Tools Required
* J 34115 Left Side Axle Seal Installer
* J 37292-B Axle Seal Protector

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the left stabilizer shaft link from the left lower control arm. Refer to Stabilizer Shaft Link Replacement (Front Suspension).
4. Remove the left tie rod end from the left steering knuckle. Refer to Steering Knuckle Replacement (Front Suspension).
5. Remove the left lower ball joint from the left steering knuckle. Refer to Steering Knuckle Replacement (Front Suspension).
6. Remove the left drive axle from the transaxle. Refer to Wheel Drive Shaft Replacement (Service and Repair).
7. Secure the left drive axle to the left steering knuckle and the strut.
8. Use a flat bladed screwdriver or a suitable tool to remove the oil seal (409) from the transaxle side case (401).

Installation Procedure

1. Lubricate the seal lip with transaxle fluid.

Important: Carefully guide the axle shaft past the lip seal. Do NOT allow the shaft splines to contact any portion of the seal lip surface.


2. Install J 37292-B in the seal (409).




3. Use J 34115 to install the new seal.
4. Remove the J 37292-B.
5. Install the drive axle to the transaxle. Refer to Wheel Drive Shaft Replacement (Service and Repair).
6. Install the left lower ball joint to the left steering knuckle. Refer to Steering Knuckle Replacement (Front Suspension).
7. Install the left tie rod end to the left steering knuckle. Refer to Steering Knuckle Replacement (Front Suspension).
8. Install the left stabilizer shaft link to the left lower control arm. Refer to Stabilizer Shaft Link Replacement (Front Suspension).
9. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
10. Lower the vehicle.

Notice: Refer to Do Not Overfill the Transmission Notice.

11. Adjust the fluid level.
12. Inspect for proper completion of the repairs.
13. Inspect for proper fluid level.
14. Inspect for fluid leaks.