Front Seat Shoulder Belt Guide Adjuster Replacement

Front Seat Shoulder Belt Guide Adjuster Replacement

Removal Procedure





1. Open the seat belt guide loop cover.
2. Remove the guide loop nut.
3. Remove the guide loop from the guide adjuster bracket.
4. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement (Service and Repair).
5. Remove the shoulder belt guide adjuster bracket bolts.
6. Remove the shoulder belt guide adjuster bracket from the center pillar.



Installation Procedure


Important: Verify that the release lever at the top of the bracket is in the full up position.






1. Position shoulder belt guide adjuster bracket to the center pillar.

Notice: Refer to Fastener Notice.

2. Install the shoulder belt guide belt adjuster bracket bolts.

Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

3. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement (Service and Repair).
4. Install the guide loop to the guide adjuster bracket.
5. Install the guide loop nut.

Tighten the guide loop nut to 42 N.m (31 lb ft).

6. Close the guide loop cover.