Secondary Air Injection Feed Tube Replacement

Secondary Air Injection Feed Tube Replacement

Removal Procedure




1. Remove the air cleaner outlet duct.
2. Disconnect the secondary air injection (AIR) feed tube quick connect fitting (1) from the AIR pump.
3. Remove the AIR feed tube bracket nut (2) from the throttle body stud.
4. Disconnect the AIR feed tube quick connect fitting (3) from the AIR shutoff and check valve.
5. Remove the AIR feed tube from the throttle body stud and the vehicle.

Installation Procedure




1. Install the AIR feed tube to the vehicle.
2. Connect the AIR feed tube quick connect fitting (3) to the AIR shutoff and check valve.
3. Install the AIR feed tube bracket onto the throttle body stud.

Notice: Refer to Fastener Notice.

4. Install the AIR feed tube bracket nut (2) to the throttle body stud.

Tighten the nuts to 10 N.m (89 lb in).

5. Connect the AIR feed tube quick connect fitting (1) to the AIR pump.
6. Install the air cleaner outlet duct.