4T80-E - Automatic Transaxle

Torque Converter Cover Replacement

Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.





2. Remove the attaching bolts and the engine-to-transmission brace.
3. Remove the torque converter cover.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the torque converter cover.
^ Tighten the cover bolt to 12 Nm (106 inch lbs.).
2. Install the engine-to-transmission brace and attaching bolts.
^ Tighten the bolts to 47 Nm (35 ft. lbs.).
3. Lower the vehicle.