Window Run Channel Replacement - Rear Door

Window Run Channel Replacement - Rear Door

Removal Procedure




1. Remove the rear door trim panel.
2. Remove the rear door water deflector.
3. Position the window in the full down position.
4. Remove the window lower run channel bolts (1).
5. Remove the window lower run channel (2) from the door.

Installation Procedure




1. Install the window lower run channel (2) in the door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the window lower run channel bolts (1).

Tighten the bolts to 10 N.m (89 lb in).

3. Inspect the window for proper operation.
4. Install the rear door water deflector.
5. Install the rear door trim panel.