Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Buick >> 2005 >> Park Avenue V6-3.8L VIN K >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> Instrument Panel Electrical Center or Junction Block Replacement

Instrument Panel Electrical Center or Junction Block Replacement



INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT

REMOVAL PROCEDURE




1. Remove the right closeout/insulator panel.
2. Remove the 2 fasteners from the relay/fuse center (1) at the lower instrument panel.
3. Remove the fastener from the forward side of the IP carrier above the relay/fuse center (1).
4. Disengage the 4 cam locks that secure the harness connectors to the relay/fuse center (1).Pull down on the tabs.
5. Remove the relay/fuse center (1) from the IP.

INSTALLATION PROCEDURE




1. Align the relay/fuse center (1) to the lower IP.
2. Install the harness connectors to the relay/fuse center (1).Engage the cam locks.
3. Install the fasteners.
4. Install the right closeout/insulator panel.
pro multis · About Operation CHARM