Accelerator Pedal: Service and Repair

ACCELERATOR CONTROLS PEDAL REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left instrument panel sound insulator.
2. Disconnect accelerator pedal electrical connector.
3. Remove the accelerated pedal bolts (2).
4. Remove the accelerator pedal (1) from the vehicle.

INSTALLATION PROCEDURE




1. Position the accelerator pedal (1) to the vehicle.
2. Install the accelerator pedal bolts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 5 N.m (44 lb in).

3. Connect accelerator pedal electrical connector.
4. Install the left instrument panel sound insulator.