Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement

AIR CONDITIONING (A/C) REFRIGERANT PRESSURE SENSOR REPLACEMENT

TOOLS REQUIRED
J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE
1. Remove the air cleaner assembly.




2. Disconnect the A/C refrigerant pressure sensor from the electrical connector.




3. Remove the A/C refrigerant pressure sensor from the condenser tube.

INSTALLATION PROCEDURE
1. Install the new O-ring seal.




2. Install the A/C refrigerant pressure sensor to the condenser tube.

Tighten the sensor to 4.7 N.m (41 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the A/C refrigerant pressure sensor to the electrical connector.
4. Install the air cleaner assembly.
5. Leak test the fittings of the component using J 39400-A.