84. Exhaust Manifold Installation - Left
Exhaust Manifold Installation - LeftNotice: Refer to Fastener Notice in Service Precautions.
1. Install the exhaust manifold studs.
^ Tighten the exhaust manifold studs to 18 Nm (13 ft. lbs.).
2. Install the exhaust manifold gasket.
3. Install the exhaust manifold.
4. Install the exhaust manifold nuts in sequence.
^ Tighten the exhaust manifold nuts in sequence to 16 Nm (12 ft. lbs.).
5. Install the left side spark plugs.
^ Tighten the spark plugs to 27 Nm (20 ft. lbs.) when installing spark plugs into a new cylinder head.
^ Tighten the spark plugs to 15 Nm (13 ft. lbs.) when reinstalling after initial installation.
6. Install the exhaust manifold heat shield.
7. Install the exhaust manifold heat shield bolts.
^ Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).