69. Engine Front Cover Installation

Engine Front Cover Installation





1. Install the engine front cover gasket.
2. Apply sealer GM P/N 12346004, (Canadian P/N 10953480) or equivalent to both sides of the lower tabs of the engine front cover gasket.





3. Install the engine front cover.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the engine front cover bolts (3).
^ Tighten the engine front cover bolts (3) to 55 Nm (41 ft. lbs.).
5. Install the engine front cover bolts (1).
^ Tighten the engine front cover bolts (1) to 55 Nm (41 ft. lbs.).
6. Install the engine front cover bolts (2).
^ Tighten the engine front cover bolts (2) to 27 Nm (20 ft. lbs.).





7. Install the crankshaft position sensor wiring bracket.
8. Install the crankshaft position sensor wiring bracket bolt.
^ Tighten the crankshaft position sensor wiring bracket bolt to 27 Nm (20 ft. lbs.).