14. Valve Rocker Arm Cover Removal - Right

Valve Rocker Arm Cover Removal - Right





1. Remove the electronic ignition control module nuts and bolts.
2. Remove the electronic ignition control module.
3. Remove the electronic ignition control module studs.





4. Remove the valve rocker arm cover bolts.

Notice: Valve rocker arm cover gasket and sealant must be carefully trimmed away from lower intake manifold gasket. Failure to do so will damage the lower intake manifold gasket, causing a severe oil leak.

Important: When removing the valve rocker arm cover make sure the gasket stays in place attached to the cylinder head.

5. Remove the valve rocker arm cover.





6. Trim valve cover gasket and sealant away from lower intake manifold gasket at the cylinder head to lower intake manifold joints (1).
7. Remove the valve rocker arm cover gasket.