Right Front

SEAT BELT RETRACTOR REPLACEMENT - RIGHT FRONT

REMOVAL PROCEDURE




1. Remove the upper center pillar trim.
2. Remove the lower center pillar trim.
3. Remove the guide loop nut.
4. Remove the guide loop from the guide adjuster bracket.
5. Remove the intermediate guide bolt.
6. Remove the seat belt retractor bolt.
7. Remove the seat belt retractor from the T-slot in the lower center pillar.

INSTALLATION PROCEDURE




1. Install the belt retractor into the T-slot in the center pillar.
2. Install the seat belt retractor bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat belt retractor bolt to 68 N.m (50 lb ft).

3. Install the intermediate guide bolts.

Tighten the intermediate guide bolts to 10 N.m (89 lb in).

4. Position the guide loop to the guide adjuster bracket.
5. Install the guide loop nut.

Tighten the guide loop nut to 42 N.m (31 lb ft).

6. Install the lower center pillar trim.
7. Install the upper center pillar trim.