Engine Support Fixture

Engine Support Fixture

Tools Required
^ J28467-34 Lift Hook Wing Nut and Washer (2)
^ J28467-6A Bracket Assembly (2)
^ J28467-7A Bolt Hook (2)
^ J28467-500 Engine Support Fixture
^ J28467-B Side Rail Support Bracket

Installation Procedure

1. Important: Supplemental support provided near the bottom of the transmission will be required to prevent the powertrain from rotating if the frame is lowered or removed.

Remove the engine mount struts.





2. Install a J28467-B and retention pin to each end of the J28467-500 beam (2).





3. Position the J28467-B to the left and right side inner fender rails in order to install the J28467-500.





4. Assemble the following to create 2 lift hook assemblies as shown:
^ J28467-34
^ J28467-6A
^ J28467-7A





5. Install the 2 lift hook assemblies (1) to the J45057-2 (2).
6. Install the engine mount strut nuts and bolts to the strut brackets.





7. Install the lift hook assemblies to the engine mount strut bolts as shown.
8. Gently tighten the J28467-34 lift hook wing nuts.