Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Buick >> 2005 >> Allure (CANADA) V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 83. Engine Front Cover Assemble

83. Engine Front Cover Assemble


Engine Front Cover Assemble

Tools Required
^ EN46103 Camshaft Actuator Valve Seal Remover/Installer
^ J29184 Output Shaft Seal Installer





1. Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.

Install the NEW crankshaft front oil seal into the engine front cover using the J29184.





2. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN46103.
pro multis · About Operation CHARM