15. Crankshaft Balancer Removal

Crankshaft Balancer Removal

Tools Required
^ EN46106 Flywheel Holding Tool
^ J38416-2 Crankshaft Button
^ J41816 Crankshaft Balancer Remover





1. Install the EN46106 through the starter mounting hole.





2. Remove the crankshaft balancer bolt.





3. Install the J38416-2 in the nose of the crankshaft.
4. Install the J41816 in order to remove the crankshaft balancer.
5. Tighten the center bolt of the J41816 in order to pull the crankshaft balancer off of the crankshaft.
6. Remove the J41816 from the crankshaft balancer.