113. Crankshaft Sprocket Installation

Crankshaft Sprocket Installation

Tools Required
^ EN46111 Crankshaft Rotation Socket





1. Ensure the crankshaft sprocket is installed with the timing mark (1) visible.





2. Install the crankshaft sprocket on to the nose of the crankshaft.
3. Align the notch in the crankshaft sprocket with the pin in the crankshaft.
4. Slide the crankshaft sprocket on the crankshaft nose until the crankshaft sprocket contacts the step in the crankshaft.





5. If necessary, align the crankshaft sprocket to the stage one timing drive assembly position using the EN46111.