Exhaust Crossover Pipe: Service and Repair
Exhaust Crossover Pipe ReplacementRemoval Procedure
1. Remove the fuel injector sight shield.
2. Remove the air cleaner intake duct.
3. Remove the exhaust crossover heat shield nuts.
4. Remove the exhaust crossover heat shield.
5. Remove the exhaust crossover pipe bolts.
6. Remove the exhaust crossover pipe.
7. Remove the exhaust crossover pipe seal.
Installation Procedure
1. Install the exhaust crossover pipe seal to the exhaust crossover pipe at the right exhaust manifold connection.
2. Install the exhaust crossover pipe.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust crossover pipe bolts.
^ Tighten the bolts to 20 Nm (15 ft. lbs.).
4. Install the exhaust crossover heat shield.
5. Install the exhaust crossover heat shield nuts.
^ Tighten the nuts to 20 Nm (15 ft. lbs.).
6. Install the air cleaner intake duct.
7. Install the fuel injector sight shield.