Front Door Limiter: Service and Repair

Door Check Link Replacement

Removal Procedure





1. Open the door.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) or Trim Panel Replacement - Side Rear Door Service and Repair
3. Remove the door control module, if applicable. Refer to Door Control Module Replacement - Front.
4. Remove the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair or Water Deflector Replacement - Rear Door (Service and Repair) .
5. Remove the check link to pillar fasteners.




6. Remove the close-out grommet.




7. Remove the check link to door fasteners (2).
8. Remove the door check link through the inside of the door.



Installation Procedure





1. Install the check link into the door.
2. Load the check link studs through the access holes on the door inner panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the check link to door fasteners (1).

Tighten the fasteners to 9 N.m (80 lb in).





4. Install the check link arm to the door hinge pillar fasteners.

Tighten the check link arm fasteners to 9 N.m (80 lb in).





5. Install the close-out grommet.
6. Install the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair or Water Deflector Replacement - Rear Door (Service and Repair) .
7. Install the door control module, if applicable. Refer to Door Control Module Replacement - Front.
8. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) or Trim Panel Replacement - Side Rear Door Service and Repair