Shifter A/T: Service and Repair
SHIFT LEVER REPLACEMENTREMOVAL PROCEDURE
Caution: Refer to SIR Caution in Service Precautions
1. Remove the steering column trim covers.
2. Rollback the shift lever boot.
3. Remove the shift lever screw (3).
4. Remove the shift lever assembly (4).
5. Remove the shift lever seal (2) from the shift lever assembly (4).
INSTALLATION PROCEDURE
1. Install the shift lever seal (2) onto the shift lever assembly (4).
2. Install the shift lever assembly (4) and secure it with the shift lever screw (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screw to 1.5 Nm (13 lb in).
3. Slide the shift lever boot into the trim covers.
IMPORTANT: The shift lever boot must be seated inside the trim covers.
4. Install the steering column trim covers.