Fuel Filler Door Replacement

FUEL FILLER DOOR REPLACEMENT

REMOVAL PROCEDURE
1. Open the fuel filler door.
2. Remove the fuel filler pocket.




3. Remove the fuel filler door retaining nuts from the inside of the quarter panel.
4. Remove the fuel filler door.

INSTALLATION PROCEDURE




1. Align the fuel filter door to the holes in the quarter panel.
2. Install the nuts inside of the quarter panel to the studs on the fuel filler door.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the nuts to 10 N.m (89 lb in).

3. Install the fuel filler pocket.
4. Close the fuel filler door.