Fuel Injector Sight Shield Replacement

Fuel Injector Sight Shield Replacement
Removal Procedure





1. Remove the nut securing the fuel injector sight shield to the engine.
2. Remove oil filler neck.
3. Lift the front of the shield up and pull towards the front of the vehicle.
4. Remove fuel injector sight shield from the engine.

Installation Procedure





1. Align the rear edge of the shield to the bracket on the rear of the engine.
2. Push the shield down to align it with the stud and the oil filler hole.
3. Install oil filler neck.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the fuel injector sight shield nut.
^ Tighten the fuel injector sight shield nut to 2 Nm (18 inch lbs.).