Closeout/Insulator Panel Replacement - Right
CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHTREMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in Restraint Systems.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the right sound insulator fasteners (2) from the I/P.
3. Disconnect the following components:
- The courtesy lamp
- The PSIR connector
- The heater temperature sensor connector
4. Remove the right sound insulator (1).
INSTALLATION PROCEDURE
1. Connect the following components to the insulator:
- The courtesy lamp
- The PSIR connector
- The heater temperature sensor connector
2. Position the right sound insulator (1) to the I/P.
3. Install the fasteners (2) to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).
4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in Restraint Systems.