Exhaust Gas Recirculation (EGR) Inlet Pipe Replacement

REMOVAL PROCEDURE




1. Remove the exhaust gas recirculation (EGR) valve.
2. Remove the EGR valve outlet pipe.
3. Remove the EGR valve inlet pipe mounting bolt (2) from the exhaust manifold.




4. Remove the mounting bolt (2) and the stud (3) from the EGR valve inlet pipe bracket.
5. Remove the EGR valve inlet pipe assembly (1).

INSTALLATION PROCEDURE




1. Install the EGR valve inlet pipe assembly (1).
2. Install the mounting bolt (2) and the stud (3) to the EGR valve inlet pipe bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolt and stud to 50 N.m (37 lb ft).




3. Install the EGR valve inlet pipe bolt (2) to the exhaust manifold.

Tighten
Tighten the bolt to 29 N.m (21 lb in).

4. Install the EGR valve outlet pipe.
5. Install the EGR valve.