Trim Panel Replacement - Rear Window Shelf

Trim Panel Replacement - Rear Window Shelf

Removal Procedure

1. Remove the rear seat cushion.
2. Remove the rear seat back.




3. Disconnect the electrical connector (3).
4. Remove the push-in fasteners (2) at the front of the rear window trim panel.
5. Slide the outer shoulder belts through the slots in the rear shelf trim panel.
6. Remove the center shoulder belt escutcheon from the rear shelf trim panel.
7. Push the center shoulder belt and escutcheon through the opening in the rear shelf trim panel.
8. Remove the rear shelf trim panel.
9. If replacing the rear shelf trim panel, remove the high mount stoplamp. Refer to High Mounted Stop Lamp Replacement in Lighting Systems.

Installation Procedure




1. Install the high mount stoplamp.
2. Align the rear shelf trim panel to the rear shelf trim panel carrier.
3. Slide the outer shoulder belts into the openings in the rear shelf trim panel.
4. Insert the center shoulder belt and escutcheon through the opening in the rear shelf trim panel.
5. Install the center shoulder belt escutcheon.
6. Install the push-in fasteners (2) at the front of the rear window trim panel.
7. Connect the electrical connector (3).
8. Install the rear seat back.
9. Install the rear seat cushion.