Trim Panel Carrier Replacement - Rear Shelf

Trim Panel Carrier Replacement - Rear Shelf

Removal Procedure

1. Remove the rear shelf trim panel.




2. Remove the fasteners.
3. Disconnect the electrical connector.
4. Disconnect the GPS antenna wire.
5. Remove the rear shelf trim panel carrier.
6. Remove the speakers.
7. Remove the rear compartment lamp.

Installation Procedure




1. Install the speakers to the rear shelf trim panel.
2. Install the rear compartment lamp.
3. Install the rear shelf trim panel carrier into the vehicle.
4. Connect the electrical connector.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the fasteners.

Tighten the fasteners to 9 N.m (80 lb in).

6. Install the rear shelf trim panel.