Reveal Molding Replacement - Front Door Window
REVEAL MOLDING REPLACEMENT - FRONT DOOR WINDOWTOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Clip Remover
REMOVAL PROCEDURE
1. Remove the front door window belt outside sealing strip.
2. Using the J 38778, remove the front door window reveal molding push-in retainer.
3. Using a small flat-bladed tool, release the retaining clips while pulling front door window reveal molding from the front door.
4. Remove the front door window reveal molding from the front door.
INSTALLATION PROCEDURE
1. Position the front door window reveal molding to the front door.
IMPORTANT: Ensure the plastic clip retainers are not damaged prior to reinstallation of the front door window reveal molding. Replace any broken clips.
2. Press the front door window reveal molding plastic retaining clips to the front door until fully seated.
3. Install the front door window reveal molding push-in retainer.
4. Install the front door window belt outside sealing strip.