Power Sunroof Does Not Open to Vent Position
POWER SUNROOF DOES NOT OPEN TO VENT POSITIONTEST DESCRIPTION
Steps 1 - 7:
The numbers below refer to the step numbers on the diagnostic table.
2. This step will test for an intermittent condition when testing whether the sunroof will slide and soft stop in vent position. If the sunroof operates properly to the full vent position, then inspect the sunroof limit switch position 1-LS1 for a stuck switch causing an intermittent short to ground.
4. Testing for a short to ground in the sunroof limit switch position 1-LS1 circuit or a stuck/closed limit switch.