Interior - Ash Tray Difficult to Open/Won't Stay Closed
Bulletin No.: 03-08-49-016Date: October 08, 2003
TECHNICAL
Subject:
Ashtray Difficult to Open or Will Not Stay Closed (Replace Ashtray Springs)
Models:
2000-2004 Buick LeSabre
Condition
Some customers may comment that the ashtray will not close or is difficult to open.
Cause
This condition may be due to the ashtray assembly being built with the incorrect springs.
Correction
Replace the ashtray springs following the procedure below:
1. Remove the ashtray assembly.
2. Using a flathead screw driver or needle nose pliers, remove the current ashtray springs.
3. Install the new springs by first attaching the spring to the ashtray lid and then hooking it into the slot of the ashtray housing. Refer to the diagram to insure the correct position of the springs, (1) for left and (2) for right.
4. Apply white grease lubricant, P/N 1052196 (in Canada, 5264008), to the coil of the new springs to reduce noise.
5. Reinstall the ashtray assembly.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer