Hood Latch Striker Replacement
Hood Latch Striker ReplacementRemoval Procedure
1. Open the hood.
2. Mark the location of the hood striker on the underside of the hood.
3. Remove the bolts (1) retaining the hood striker (2) to the hood.
4. Remove the hood striker from the hood.
Installation Procedure
1. Install the hood striker (2) to the hood.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners (1) to retain the hood strike (2) to the hood.
Tighten the bolts to 9 N.m (80 lb in).
3. Close the hood.