Shifter A/T: Service and Repair

Shift Control Replacement

Removal Procedure





1. Remove the front floor console.
2. Remove the console wiring harness.





3. Remove the console shift control wiring harness.
4. Remove the range selector cable for the automatic transaxle (AT).
5. Remove the park/lock cable.





6. Remove the console shift control nuts.
7. Remove the console shift control.

Installation Procedure





1. Install the console shift control.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the console shift control nuts.
^ Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
3. Install the park/lock cable.
4. Install the AT range selector cable.





5. Install the console shift control wiring harness.





6. Install the console wiring harness.
7. Install the front floor console.