Air Temperature Sensor Replacement - Upper Left

REMOVAL PROCEDURE




1. Remove the left side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
2. Remove the aspirator muffler.
3. Remove the electrical connector from the left air temperature actuator.
4. Remove the left air temperature actuator retaining screws (1).




5. Remove the left air temperature actuator.

INSTALLATION PROCEDURE




1. Install the left air temperature actuator.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the left air temperature actuator retaining screws (1).

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

3. Install the electrical connector to the left air temperature actuator.
4. Install the aspirator muffler.
5. Install the left side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
6. Recalibrate the actuators. Refer to BCM Programming/RPO Configuration in Body Control Module System.